Show Filters  

Categories

Filters

Product Type

Grease

ISO Viscosity Grade of Base Oil

Base Oil Type

Thickener

NLGI Grade

Fluid

Food Grade (NSF H1 Registered)

Fluid Type

ISO Grade

Industrial Products

Sort :
176 GEAR GREASE

176 GEAR GREASE
NLGI #00, Inorganic/Organic Combination grease

Open gears, large sleeve bearings, rails, house rollers

  • Adhesive, semi-fluid grease
  • For all types of open gears lubricated by centralized system
  • Provides good pumpability without the use of harmful solvents
VIEW DETAILS
3H Direct

3H Direct
NSF 3H/H1 Registered

For food processing applications where direct contact with edible product is possible

  • Safe for applications where direct contact with food is possible
  • Formulated from pure USP white mineral oil
VIEW DETAILS
405 Cutting Oil

405 Cutting Oil
ISO Grade 46, Mineral oil

A dark pipe threading oil recommended for difficult machining operations

  • Outstanding dark pipe threading oil    
  • Provides optimum results
VIEW DETAILS
981 Natural Gas Compressor Lubricant

981 Natural Gas Compressor Lubricant
ISO Grade 100, Synthetic Natural Gas Compressor Fluid

LUBRIPLATE 981 is intended for the lubrication of flooded rotary screw and vane type compressors. LUBRIPLATE 981 may be used as a lubricant for processing natural gas, carbon dioxide and other gases t

  • Higher film strength than traditional lubricants    
  • Protects against corrosion    
  • Fully compatible with most compressor components
VIEW DETAILS
989 Synthetic Compressor Lubricant

989 Synthetic Compressor Lubricant
ISO Grade 150, Synthetic Natural Gas Compressor Fluid

LUBRIPLATE 989 is intended for the lubrication of flooded rotary screw and vane-type compressors processing natural gas, carbon dioxide or other hydrocarbon gases. LUBRIPLATE 989 may also be used as a

VIEW DETAILS
AC-0 (Air Compressor Oil)

AC-0 (Air Compressor Oil)
ISO Grade 32, Mineral oil

Multi-functional for use in air compressors, hydraulic systems and recirculating systems

  • Outstanding Anti-Wear Protection    
  • High aniline points for controlled seal-swelling characteristics    
  • Rust and corrosion resistant properties
VIEW DETAILS
AC-1 (Air Compressor Oil)

AC-1 (Air Compressor Oil)
ISO Grade 46, Mineral oil

Multi-functional for use in air compressors, hydraulic systems and recirculating systems

  • Outstanding Anti-Wear Protection    
  • High aniline points for controlled seal-swelling characteristics    
  • Rust and corrosion resistant properties
VIEW DETAILS
AC-2 (Air Compressor Oil)

AC-2 (Air Compressor Oil)
ISO Grade 68, Mineral oil

Multi-functional for use in air compressors, hydraulic systems and recirculating systems

  • Outstanding Anti-Wear Protection    
  • High aniline points for controlled seal-swelling characteristics    
  • Rust and corrosion resistant properties
VIEW DETAILS
AC-2A (Air Compressor Oil)

AC-2A (Air Compressor Oil)
ISO Grade 100, Mineral oil

Multi-functional for use in air compressors, hydraulic systems and recirculating systems

  • Outstanding Anti-Wear Protection    
  • High aniline points for controlled seal-swelling characteristics    
  • Rust and corrosion resistant properties
VIEW DETAILS
AC-3 (Air Compressor Oil)

AC-3 (Air Compressor Oil)
ISO Grade 150, Mineral oil

Multi-functional for use in air compressors, hydraulic systems and recirculating systems

  • Outstanding Anti-Wear Protection    
  • High aniline points for controlled seal-swelling characteristics    
  • Rust and corrosion resistant properties
VIEW DETAILS
AC-4 (Air Compressor Oil)

AC-4 (Air Compressor Oil)
ISO Grade 220, Mineral oil

Multi-functional for use in air compressors, hydraulic systems and recirculating systems

  • Outstanding Anti-Wear Protection    
  • High aniline points for controlled seal-swelling characteristics    
  • Rust and corrosion resistant properties
VIEW DETAILS
Aero

Aero
NLGI #1, Lithium grease

Garage doors, O-rings, seals, trailer landing gear cases, cables

  • Low Torque start-up capability    
  • Corrosion and oxidation resistant    
  • Long lasting film strength over a wide temperature range
VIEW DETAILS
Air Tool Lubricant

Air Tool Lubricant
ISO Grade 32, Mineral oil

Rotary and reciprocating air tools, such as chipping hammers, impact wrenches, air motors, grinders, reamers, drills

  • Prevents formation of gum    
  • Provides superior lubrication
VIEW DETAILS
APG-140

APG-140
ISO Grade 460, Mineral oil

Extreme pressure (EP) gear lubricant where SAE 140 gear oil is required, worm gear boxes

  • High viscosity index    
  • Excellent film strength    
  • High aniline point, great seal compatibility
VIEW DETAILS
APG-250

APG-250
ISO Grade 680, Mineral oil

Extreme pressure (EP) gear lubricant where SAE 250 gear oil is required

  • High viscosity index    
  • Excellent film strength    
  • High aniline point, great seal compatibility
VIEW DETAILS
APG-75

APG-75
ISO Grade 32, Mineral oil

Extreme pressure (EP) gear lubricant where SAE 75 gear oil is required

  • High viscosity index    
  • Excellent film strength    
  • High aniline point, great seal compatibility
VIEW DETAILS
APG-80

APG-80
ISO Grade 68, Mineral oil

Extreme pressure (EP) gear lubricant where SAE 80 gear oil is required

  • High viscosity index    
  • Excellent film strength    
  • High aniline point, great seal compatibility
VIEW DETAILS
APG-80W-140

APG-80W-140
ISO Grade 320, Mineral oil

Extreme pressure (EP) , wide range multi-grade gear oil

  • High viscosity index    
  • Excellent film strength    
  • High aniline point, great seal compatibility
VIEW DETAILS
APG-80W-90

APG-80W-90
ISO Grade 150, Mineral oil

Extreme pressure (EP) gear lubricant for use in automotive type hypoid gears

  • Ideal for heavy-duty transmissions    
  • High aniline point, great seal compatibility    
  • Meets API GL-5 and MT-1
VIEW DETAILS
APG-90

APG-90
ISO Grade 220, Mineral oil

Extreme pressure (EP) gear lubricant where SAE 90 gear oil is required, helical gear boxes

  • High viscosity index    
  • Excellent film strength    
  • High aniline point, great seal compatibility
VIEW DETAILS
Auto/Marine Guard

Auto/Marine Guard
ISO Grade 7, Mineral oil

Moisture displacement, wet start applications

  • Moisture displacement    
  • Rust Preventive Coating    
  • Excellent “wet start” product
VIEW DETAILS
Barrier Fluid 22

Barrier Fluid 22
ISO Grade 22, Polyalphaolefin (PAO) Synthetic-based fluid

Mechanical seals, tight tolerances

  • Recommended for tight tolerances
  • Outstanding heat transfer properties
  • Recommended for dual mechanical seals
VIEW DETAILS
Barrier Fluid 7

Barrier Fluid 7
ISO Grade 7, Polyalphaolefin (PAO) Synthetic-based fluid

Mechanical seals, tight tolerances

  • Recommended for tight tolerances
  • Outstanding heat transfer properties
  • Recommended for dual mechanical seals
VIEW DETAILS
Biobased EP-2

Biobased EP-2
NLGI #2, Vegetable-based, Lithium 12 Hydroxy grease

Articulate tug barges (ATB), rudder shafts, wire rope

  • Excellent for all slow to medium bearings
  • Exceptional high shear stability, water resistance and load-carrying properties
  • Designed and developed to meet the US EPA 2013 Vessel General Permit (VGP) requirements.
VIEW DETAILS
Biobased Green Hydraulic Oil 32

Biobased Green Hydraulic Oil 32
ISO Grade 32, Vegetable oil

LUBRIPLATE Biobased Green Hydraulic Fluids are designed for use in mobile and stationary hydraulic vane, piston and gear-type pumps and have shown to have exceptional anti-wear performance.

  • Environmentally responsible    
  • Anti-wear, anti-rust    
  • Ultimately biodegradable
VIEW DETAILS
Biobased Green Hydraulic Oil 46

Biobased Green Hydraulic Oil 46
ISO Grade 46, Vegetable oil

LUBRIPLATE Biobased Green Hydraulic Fluids are designed for use in mobile and stationary hydraulic vane, piston and gear-type pumps and have shown to have exceptional anti-wear performance.

  • Environmentally responsible    
  • Anti-wear, anti-rust    
  • Ultimately biodegradable
VIEW DETAILS
Biobased Green Hydraulic Oil 68

Biobased Green Hydraulic Oil 68
ISO Grade 68, Vegetable oil

LUBRIPLATE Biobased Green Hydraulic Fluids are designed for use in mobile and stationary hydraulic vane, piston and gear-type pumps and have shown to have exceptional anti-wear performance.

  • Environmentally responsible    
  • Anti-wear, anti-rust    
  • Ultimately biodegradable
VIEW DETAILS
Biodegradable Penetrating Oil

Biodegradable Penetrating Oil
Multi-Purpose Lubricating Fluid

Multi-purpose, biodegradable, penetrating oil

  • Ultimately biodegradable penetrating fluid   
  • Excellent moisture displacement properties for 'Wet Start' applications
  • Metal surface protection
VIEW DETAILS
Bio-Synxtreme EGO-150

Bio-Synxtreme EGO-150
Synthetic, long-life, SAE 90 Gear oil

Biodegradable synthetic gear oil 

  • Ultimately biodegradable
  • Synthetic-long life, SAE-90 gear fluid
  • Fortified with extreme pressure and anti-wear additives
VIEW DETAILS
Bio-Synxtreme HF-32

Bio-Synxtreme HF-32
ISO Grade 32, Polyalkylene Glycol (PAG)-Based Synthetic oil

High performance hydraulic fluid

  • Clean, long-lasting operation    
  • Excellent anti-wear performance    
  • Biodegradability
VIEW DETAILS
Bio-Synxtreme HF-46

Bio-Synxtreme HF-46
ISO Grade 46, Polyalkylene Glycol (PAG)-Based Synthetic oil

High performance hydraulic fluid

  • Clean, long-lasting operation    
  • Excellent anti-wear performance    
  • Biodegradability
VIEW DETAILS
Bio-Synxtreme HF-68

Bio-Synxtreme HF-68
ISO Grade 68, Polyalkylene Glycol (PAG)-Based Synthetic oil

High performance hydraulic fluid

  • Clean, long-lasting operation    
  • Excellent anti-wear performance    
  • Biodegradability
VIEW DETAILS
Chain & Cable Fluid

Chain & Cable Fluid
ISO Grade 32, Penetrating oil

Penetrating oil for roller chains, wire ropes, latches, pins, hinges,

  • Penetrates and lubricates    
  • Prevents rusting    
  • Acts as a cleansing agent
VIEW DETAILS
Chain & Cable Fluid Spray

Chain & Cable Fluid Spray
ISO Grade 32, Penetrating fluid

Penetrating oil for roller chains, wire ropes, latches, pins, hinges,

  • Penetrates and lubricates    
  • Prevents rusting    
  • Acts as a cleansing agent
VIEW DETAILS
Chain & Cable Heavy

Chain & Cable Heavy
ISO Grade 150, Penetrating oil

Heavy-duty applications including medium/large size roller chains, heavy cables, drive chains on concrete mixers

  • Heavy-duty, tacky    
  • Penetrates and lubricates    
  • Prevents rust and corrosion
VIEW DETAILS
Clearplex-1

Clearplex-1
NLGI #1, Aluminum Complex grease

Food and beverage applications where clear lubricant is desired

  • NSF H1 Registered    
  • Water-Resistant    
  • Contains anti-microbial additive
VIEW DETAILS
Clearplex-2

Clearplex-2
NLGI #2, Aluminum Complex grease

Food and beverage applications where clear lubricant is desired

  • NSF H1 Registered    
  • Water-Resistant    
  • Contains anti-microbial additive
VIEW DETAILS
CP Gear Oil 8-A

CP Gear Oil 8-A
ISO Grade 1000, Mineral oil

Cone Drives, double-enveloping worm gear drives

VIEW DETAILS
CS-FG EP-2

CS-FG EP-2
NLGI #2, Calcium Sulfonate grease

Meat processing plants, canneries, dairies, breweries

  • NSF H1 Registered    
  • Superior protection from rust and corrosion    
  • Excellent resistance to water washout and spray off
VIEW DETAILS
Cut-N-Cool

Cut-N-Cool
ISO Grade 68, Mineral oil

Cutting Fluid

  • Increases tool life    
  • Excellent corrosion inhibition    
  • Excellent finish in machining and grinding operations
VIEW DETAILS
Darl No. 2

Darl No. 2
ISO Grade 46, Mineral oil

Cutting Fluid

  • Non-corrosive    
  • Non-staining    
  • Recommended for all types of machining operations
VIEW DETAILS
Dexron III/Mercon ATF

Dexron III/Mercon ATF
ISO Grade 32, Automatic Transmission Fluid

qualified automatic transmission fluids

  • Superior wear prevention    
  • Extensive oxidation stability    
  • All season protection
VIEW DETAILS
DS-ES

DS-ES
NLGI #1, Lithium Complex grease

Electrical switch contacts, aircraft switch assemblies, battery posts

  • Exceptional oxidation resistance for extended operating life    
  • Low Torque start-up capabilities especially in cold weather conditions    
  • Excellent metal, rubber and plastic compatibility
VIEW DETAILS
EMB

EMB
NLGI #2, Lithium grease

High speed bearings, electric motors

  • Extremely shear stable for extended regreasing intervals    
  • Combination of anti-wear and polymer offer extra lubricity thereby reducing heat, frictional drag & power consumption
  • Excellent compatibility with seals, gaskets & plastics
VIEW DETAILS
FGL-0

FGL-0
NLGI #0, Aluminum Complex grease

High-speed can closing equipment, centralized lubrication systems

  • NSF H1 Registered    
  • Excellent resistance to water washout    
  • Contains anti-microbial
VIEW DETAILS
FGL-00

FGL-00
NLGI #00, Aluminum Complex grease

Leaky gear cases, centralized lubrication systems where a semi-fluid grease is required

  • NSF H1 Registered    
  • Excellent resistance to water washout    
  • Contains anti-microbial
VIEW DETAILS
FGL-1

FGL-1
NLGI #1, Aluminum Complex grease

Multi-purpose food grade applications

  • NSF H1 Registered    
  • Excellent resistance to water washout    
  • Contains anti-microbial
VIEW DETAILS
FGL-1 Spray

FGL-1 Spray
NLGI #1, Aluminum Complex grease

Multi-purpose food grade applications

  • NSF H1 Registered    
  • Excellent resistance to water washout    
  • Contains anti-microbial
VIEW DETAILS
FGL-2

FGL-2
NLGI #2, Aluminum Complex grease

Multi-purpose food grade applications under severe operating conditions such as water, steam, high-temperature

  • NSF H1 Registered    
  • Excellent resistance to water washout    
  • Contains anti-microbial
VIEW DETAILS
FGL-CC

FGL-CC
NLGI #0/00, Aluminum Complex grease

High-speed can closing equipment, centralized lubrication systems

  • NSF H1 Registered    
  • Excellent resistance to water washout    
  • Contains anti-microbial
VIEW DETAILS
Fiske AW-32 Hydraulic Oil

Fiske AW-32 Hydraulic Oil
ISO Grade 32, Mineral oil

All types of hydraulic and recirculating systems found on industrial, construction and automotive equipment

  • Anti-wear additive package
  • High aniline point prolongs seal life
  • Designed to meet Cincinnati Milacron and Vickers specs
VIEW DETAILS
Fiske AW-46 Hydraulic Oil

Fiske AW-46 Hydraulic Oil
ISO Grade 46, Mineral oil

All types of hydraulic and recirculating systems found on industrial, construction and automotive equipment

  • Anti-wear additive package
  • High aniline point prolongs seal life
  • Designed to meet Cincinnati Milacron and Vickers specs
VIEW DETAILS
Fiske AW-68 Hydraulic Oil

Fiske AW-68 Hydraulic Oil
ISO Grade 68, Mineral oil

All types of hydraulic and recirculating systems found on industrial, construction and automotive equipment

  • Anti-wear additive package
  • High aniline point prolongs seal life
  • Designed to meet Cincinnati Milacron and Vickers specs
VIEW DETAILS
Flokool XX Cutting Oil

Flokool XX Cutting Oil
ISO Grade 32, Mineral oil

Cutting Fluid

  • Heavy-duty    
  • Has been used very successfully on internal as well as external broaching
VIEW DETAILS
FML-0

FML-0
NLGI #0, Anhydrous Calcium grease

General purpose food processing applications where an H1, NLGI #0 is required

  • NSF H1 Registered    
  • USP White Mineral-Oil Based Food Grade Grease    
  • Exceptional anti-wear properties
VIEW DETAILS
FML-1

FML-1
NLGI #1, Anhydrous Calcium grease

  • NSF H1 Registered    
  • USP White Mineral-Oil Based Food Grade Grease    
  • Exceptional anti-wear properties
VIEW DETAILS
FML-2

FML-2
NLGI #2, Anhydrous Calcium grease

General purpose food processing applications where an H1, NLGI #2 is required

  • NSF H1 Registered    
  • USP White Mineral-Oil Based Food Grade Grease    
  • Exceptional anti-wear properties
VIEW DETAILS
FMO-1100-AW

FMO-1100-AW
ISO Grade 220, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-150-AW

FMO-150-AW
ISO Grade 32, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-1700-AW

FMO-1700-AW
ISO Grade 320, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-200

FMO-200
ISO Grade 46, USP White Mineral oil

Food processing applications

  • NSF H1 and 3H Registered    
  • Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible
  • Made from the highest quality USP mineral oils
VIEW DETAILS
FMO-200-AW

FMO-200-AW
ISO Grade 46, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-2400-AW

FMO-2400-AW
ISO Grade 460, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-350

FMO-350
ISO Grade 68, USP White Mineral oil

Food processing applications

  • NSF H1 and 3H Registered 
  • Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible   
  • Made from the highest quality USP mineral oils
VIEW DETAILS
FMO-350-AW

FMO-350-AW
ISO Grade 68, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-350-AW Spray

FMO-350-AW Spray
ISO Grade 68, USP White mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-350-AW-GG-OR

FMO-350-AW-GG-OR
ISO Grade 68, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-3800-AW

FMO-3800-AW
ISO Grade 680, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-45

FMO-45
ISO Grade 5, USP White Mineral oil

Food processing applications

  • NSF H1 and 3H Registered    
  • Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible
  • Made from the highest quality USP mineral oils
VIEW DETAILS
FMO-500

FMO-500
ISO Grade 100, USP White Mineral oil

Food processing applications

  • NSF H1 and 3H Registered    
  • Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible
  • Made from the highest quality USP mineral oils
VIEW DETAILS
FMO-500-AW

FMO-500-AW
ISO Grade 100, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-500-AW-OR

FMO-500-AW-OR
ISO Grade 100, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-85

FMO-85
ISO Grade 22, USP White Mineral oil

Food processing applications

  • NSF H1 and 3H Registered    
  • Acceptable for use as a release agent on grills, ovens and other food processing equipment where direct contact with food is possible
  • Made from the highest quality USP mineral oils
VIEW DETAILS
FMO-85-AW

FMO-85-AW
ISO Grade 22, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-85-AW Spray

FMO-85-AW Spray
ISO Grade 22, H1 Registered penetrating oil

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
FMO-900-AW

FMO-900-AW
ISO Grade 150, USP White Mineral oil

Hydraulics, Chains, Gearboxes, Air Line Lubricators, General Oiling

  • Fortified with maximum strength antioxidant    
  • Thermally and oxidatively stable    
  • Zinc-free
VIEW DETAILS
Food Grade Cooker Oil

Food Grade Cooker Oil
ISO Grade 150, USP White Mineral Oil

Manzel Lubricators on FMC Cookers and Sterilizers

  • USP Mineral Oil-Based Food Grade Oil
  • Corrosion Resistant
  • Reduces oxidation and sludge
VIEW DETAILS
FP-150 OIL

FP-150 OIL
ISO Grade 320, Mineral oil

Chains, conveyors, wire ropes, sight feed oilers

  • NSF H1 Registered    
  • Clean, safe, non-toxic lubrication    
  • Water and steam resistant
VIEW DETAILS
FP-150-L OIL

FP-150-L OIL
ISO Grade 100, Mineral oil

Chains, conveyors, wire ropes, sight feed oilers

  • NSF H1 Registered    
  • Clean, safe, non-toxic lubrication    
  • Water and steam resistant
VIEW DETAILS
Gear Shield

Gear Shield
NLGI #1, Lithium/Asphalt grease

Open gearing that require an NLGI #1 grade lubricant

  • Waterproof, corrosion resistant    
  • Strong adhesive and stay-put properties    
  • Solid fillers for extra wear protection under heavy load
VIEW DETAILS
Gear Shield Extra Heavy

Gear Shield Extra Heavy
NLGI #3, Lithium/Asphalt grease

Heavy-duty construction, racks, pinions, slides, open gears

  • Waterproof, corrosion resistant    
  • Strong adhesive and stay-put properties    
  • Solid fillers for extra wear protection under heavy load
VIEW DETAILS
Gear Shield Extra Heavy Spray

Gear Shield Extra Heavy Spray
NLGI #3, Lithium/Asphalt grease

Heavy-duty construction, racks, pinions, slides, open gears

  • Waterproof, corrosion resistant    
  • Strong adhesive and stay-put properties    
  • Solid fillers for extra wear protection under heavy load
VIEW DETAILS
Gear Shield Heavy

Gear Shield Heavy
NLGI #2, Lithium/Asphalt grease

Open gearing that require an NLGI #2 grade lubricant

  • Waterproof, corrosion resistant    
  • Strong adhesive and stay-put properties    
  • Solid fillers for extra wear protection under heavy load
VIEW DETAILS
General Purpose Food Grade Silicone Spray

General Purpose Food Grade Silicone Spray

Silicone for food processing equipment

  • Contains 20% Silicone
  • NSF H1 Registered    
  • Wide operating temperature range    
  • Water resistance
VIEW DETAILS
GPO Motor Oil

GPO Motor Oil
SAE 40, Motor Oil

Off-highway diesel equipment, farm machinery, 2-stroke diesel engines

  • Protects against rust and bearing corrosion    
  • Good resistance to foaming and aeration    
  • Protects against sludge and varnish formation
VIEW DETAILS
GPO Motor Oil

GPO Motor Oil
SAE 10W-30, Motor Oil

Four-stroke cycle diesel engines

  • Protects against rust and bearing corrosion    
  • Good resistance to foaming and aeration    
  • Protects against sludge and varnish formation
VIEW DETAILS
GPO Motor Oil

GPO Motor Oil
SAE 15W-40, Motor Oil

Diesel and gasoline engines

  • Protects against rust and bearing corrosion    
  • Good resistance to foaming and aeration    
  • Protects against sludge and varnish formation
VIEW DETAILS
GPO Motor Oil - SAE 30

GPO Motor Oil - SAE 30
SAE 30, Motor Oil

Commercial mixed-fleet engines

  • Resists breakdown under high temperatures    
  • Maintains oil pressure under heavy load conditions    
  • Minimizes rust and corrosion
VIEW DETAILS
GR-132

GR-132
NLGI #1, Lithium grease

Portable electric tool gear cases, high speed ball and roller bearings, high speed mixers, fractional horsepower gear cases

  • Excellent oil-bleed resistance    
  • Exceptional anti-wear properties    
  • Highly oxidation resistant
VIEW DETAILS
GR-399

GR-399
NLGI #1.5, Lithium/Bentone grease

VIEW DETAILS
Heat Transfer Oil

Heat Transfer Oil
ISO Grade 150, Mineral oil

Oil-type heat exchangers used in asphalt plants, tar kettles, concrete tile and black curing machines

VIEW DETAILS
Heat Transfer Oil - Extra Light

Heat Transfer Oil - Extra Light
ISO Grade 32, Mineral oil

Oil-type heat exchangers used in asphalt plants, tar kettles, concrete tile and black curing machines

VIEW DETAILS
Heat Transfer Oil - Light

Heat Transfer Oil - Light
ISO Grade 68, Mineral oil

Oil-type heat exchangers used in asphalt plants, tar kettles, concrete tile and black curing machines

VIEW DETAILS
High Temp

High Temp
NLGI #2, Bentone grease

High temperature applications. Not recommended for moderate to high speed bearings.

  • Very chemical resistant    
  • Rust & corrosion resistant    
  • High anti-wear film protection
VIEW DETAILS
HO-0

HO-0
ISO Grade 32, Hydraulic oil

Multi-functional for use in hydraulic applications, air compressors, turbines, gear cases and general lubrication

  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics    
  • Foam Suppression Properties
VIEW DETAILS
HO-1

HO-1
ISO Grade 46, Hydraulic oil

Multi-functional for use in hydraulic applications, air compressors, turbines, gear cases and general lubrication

  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics    
  • Foam Suppression Properties
VIEW DETAILS
HO-2

HO-2
ISO Grade 68, Hydraulic oil

Multi-functional for use in hydraulic applications, air compressors, turbines, gear cases and general lubrication

  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics    
  • Foam Suppression Properties
VIEW DETAILS
HO-2A

HO-2A
ISO Grade 100, Lubricating oil

Multi-functional for use in hydraulic applications, air compressors, turbines, gear cases and general lubrication

  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics    
  • Foam Suppression Properties
VIEW DETAILS
HO-3

HO-3
ISO Grade 150, Lubricating oil

Multi-functional for use in gear cases, bearings, hydraulic applications, air compressors and central lubricating oil systems

  • Fluid Zinc for anti-wear properties    
  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics
VIEW DETAILS
HO-32

HO-32
ISO Grade 32, Hydraulic Oil

Hydraulic systems which call for an anti-wear fluid

  • High performance anti-wear properties    
  • Oxidation and thermal stability    
  • Excellent filterability in fine filtration systems
VIEW DETAILS
HO-4

HO-4
ISO Grade 220, Lubricating oil

Multi-functional for use in gear cases, bearings, hydraulic applications, air compressors and central lubricating oil systems

  • Fluid Zinc for anti-wear properties    
  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics
VIEW DETAILS
HO-46

HO-46
ISO Grade 46, Hydraulic oil

Hydraulic systems which call for an anti-wear fluid

  • High performance anti-wear properties    
  • Oxidation and thermal stability    
  • Excellent filterability in fine filtration systems
VIEW DETAILS
HO-5

HO-5
ISO Grade 320, Lubricating oil

Multi-functional for use in gear cases, bearings, hydraulic applications, air compressors and central lubricating oil systems

  • Fluid Zinc for anti-wear properties    
  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics
VIEW DETAILS
HO-6

HO-6
ISO Grade 460, Lubricating oil

Multi-functional for use in gear cases, bearings, hydraulic applications, air compressors and central lubricating oil systems

  • Fluid Zinc for anti-wear properties    
  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics
VIEW DETAILS
HO-68

HO-68
ISO Grade 68, Hydraulic Oil

Hydraulic systems which call for an anti-wear fluid

  • High performance anti-wear properties    
  • Oxidation and thermal stability    
  • Excellent filterability in fine filtration systems
VIEW DETAILS
HTCL-FG 220

HTCL-FG 220
ISO Grade 220, Polyolester-Based Synthetic oil (POE)

Oven chains

  • Eliminates carbon build-up on chains    
  • Does not contain harmful VOC’s which pollute the atmosphere    
  • Advanced ester chemistry reduces friction, wear and energy costs
VIEW DETAILS
HTCL-FG 68

HTCL-FG 68
ISO Grade 68, Polyolester-Based Synthetic oil (POE)

Oven chains

  • Eliminates carbon build-up on chains    
  • Does not contain harmful VOC’s which pollute the atmosphere    
  • Advanced ester chemistry reduces friction, wear and energy costs
VIEW DETAILS
HTO Special

HTO Special
NSF H1/HT1 Registered, Food grade, Heat transfer oil

Closed-loop heat transfer thermal fluid systems

  • Excellent thermal stability and low volatility providing longer service life
  • 600°F(316°C) maximum operating temperature
  • 650°F(343°C) maximum film temperature
  • Low viscosity and pour point for easy start up
  • NSF H1, HT1 Food Grade Registered
  • Environmentally friendly, non-toxic/non-hazardous
VIEW DETAILS
Hydraulic Jack Oil

Hydraulic Jack Oil
ISO Grade 32, Mineral oil

Hydraulic jacks

  • Fluid Zinc for anti-wear properties    
  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics
VIEW DETAILS
Hydroflush

Hydroflush
ISO Grade 22, Flushing oil

For flushing hydraulics

  • Removes varnish and carbon deposits, which greatly improves efficiency and life expectancy    
  • Compatible with petroleum base oils    
  • Provides excellent solubility, solvency and cleaning capabilities
VIEW DETAILS
Kling Gear SAE 85W-140

Kling Gear SAE 85W-140
ISO Grade 460, Mineral oil

Gear oil applications requiring a strongly adhesive fluid

  • Strongly adhesive    
  • Fortified with extreme pressure additives
VIEW DETAILS
Kling Gear, SAE 80W-90

Kling Gear, SAE 80W-90
ISO Grade 150, Mineral oil

Gear oil applications requiring a strongly adhesive fluid

  • Strongly adhesive    
  • Fortified with extreme pressure additives
VIEW DETAILS
Low Temp

Low Temp
NLGI #1.5, Anhydrous Calcium grease

General purpose low temperature lubricant for chains, ball and roller bearings, garage door openers, railroad switches, electronic equipment

  • Excellent cold operating characteristics    
  • Anti-wear protection    
  • Extremely water-resistant
VIEW DETAILS
LTR-2

LTR-2
NLGI #2, Lithium Complex grease

Multi-purpose industrial construction, automotive, marine, mining where a red grease is required

  • Tacky, adhesive    
  • Water-resistant    
  • Red in color
VIEW DETAILS
MAG-00

MAG-00
NLGI #00, Lithium 12 Hydroxy grease

Centralized lubricating systems, gear cases requiring semi-fluid grease, high-speed roller bearing guide pin sleeves

  • Polymer shear stable    
  • High film strength, low torque    
  • Prevents wear, rust and corrosion
VIEW DETAILS
MAG-1

MAG-1
NLGI #1, Lithium 12 Hydroxy grease

Low temperature applications such as freezers and fifth wheels

  • Polymer shear stable    
  • High film strength, low torque    
  • Prevents wear, rust and corrosion
VIEW DETAILS
Marine & Auto Guard

Marine & Auto Guard
ISO Grade 7, Mineral Oil

Moisture displacement, wet start applications

  • Moisture displacement    
  • Rust Preventive Coating    
  • Excellent “wet start” product
VIEW DETAILS
Marine-Safe 100

Marine-Safe 100
ISO Grade 100, Hydraulic oil

LUBRIPLATE Marine-Safe Hydraulic Oils are high performance anti-wear hydraulic oils designed for use in high-pressure hydraulic equipment operating in environmentally sensitive areas.

  • Environmentally safe    
  • Easily recyclable    
  • Inherently biodegradable
VIEW DETAILS
Marine-Safe 32

Marine-Safe 32
ISO Grade 32, Hydraulic oil

LUBRIPLATE Marine-Safe Hydraulic Oils are high performance anti-wear hydraulic oils designed for use in high-pressure hydraulic equipment operating in environmentally sensitive areas.

  • Non-toxic to aquatic life per U.S. EPA LC50  
  • Zinc-free anti-wear additive system   
  • Inherently biodegradable
VIEW DETAILS
Marine-Safe 46

Marine-Safe 46
ISO Grade 46, Hydraulic oil

LUBRIPLATE Marine-Safe Hydraulic Oils are high performance anti-wear hydraulic oils designed for use in high-pressure hydraulic equipment operating in environmentally sensitive areas.

  • Environmentally safe    
  • Easily recyclable    
  • Inherently biodegradable
VIEW DETAILS
Marine-Safe 68

Marine-Safe 68
ISO Grade 68, Hydraulic oil

LUBRIPLATE Marine-Safe Hydraulic Oils are high performance anti-wear hydraulic oils designed for use in high-pressure hydraulic equipment operating in environmentally sensitive areas.

  • Environmentally safe    
  • Easily recyclable    
  • Inherently biodegradable
VIEW DETAILS
Metal Working Fluid

Metal Working Fluid
ISO Grade 32, Mineral oil

Metal working fluid applications such as drilling, sawing, tapping, grinding, thread chasing, pipe cutting

  • Does not contain Fluorocarbons    
  • Does not contain 1,1,1 Trichloroethane
VIEW DETAILS
Minus 70

Minus 70
ISO Grade 15, Hydraulic Oil

Extreme low temperature hydraulic applications

  • Fluid Zinc for anti-wear properties    
  • Extreme high viscosity index for excellent fluidity at extreme cold temperatures    
  • -70°F to -80°F pour point
VIEW DETAILS
MO-LITH No. 2

MO-LITH No. 2
NLGI #2, Lithium grease

Anti-wear/extreme pressure reinforced by the addition of Molybdenum Disulfide (MoS2)

  • Primary friction barrier lubricant    
  • Non-corrosive    
  • High water resistance
VIEW DETAILS
Multi-Lube A

Multi-Lube A
NLGI #2, Anhydrous Calcium grease

Plain and anti-friction bearings, cams, slides and open gears, wet applications

  • Multi-purpose grease    
  • Non-corrosive
VIEW DETAILS
MV-HO Hydraulic Oil

MV-HO Hydraulic Oil
ISO Grade 32, Mineral oil

High speed, high pressure, mobile equipment service, machine tool applications

  • Provides improved thermal stability    
  • Hydrolytic stability    
  • Anti-wear high pressure protection
VIEW DETAILS
No. 0

No. 0
ISO Grade 7, Mineral oil

High speed applications, spindles

  • 5W oil for extremely high speed applications
  • Superior protective coating of metals
  • Exceptional lubricity
VIEW DETAILS
No. 1

No. 1
ISO Grade 22, Mineral oil

Way lubricant

  • 10W oil for high speed spindles, grinders
  • Superior protective coating of metals
  • Exceptional lubricity

 
VIEW DETAILS
No. 100

No. 100
NLGI #00, Calcium grease

Motor assembly, rust prevention

  • Engine rust prevention    
  • Water resistant
VIEW DETAILS
No. 105

No. 105
NLGI #0, Calcium grease

Motor assembly, rust prevention

  • Prevents “dry start”, scuffing, scoring, and friction
  • Protects freshly machined engine parts
  • Zinc-oxide anti-wear additive
VIEW DETAILS
No. 107

No. 107
NLGI #1, Calcium grease

Concrete release form agent

VIEW DETAILS
No. 110

No. 110
NLGI #2.5, Calcium grease

Brake lubricant

VIEW DETAILS
No. 115

No. 115
NLGI #4, Calcium grease

Water pump lubricant

VIEW DETAILS
No. 1200-2

No. 1200-2
NLGI #2, Lithium 12 Hydroxy grease

Multi-purpose for heavy construction, wheel bearings, chassis points, water pumps, fifth wheels

  • Exceptional film strength    
  • Excellent shear stability at high temperatures    
  • Highly water proof
VIEW DETAILS
No. 1240

No. 1240
NLGI #0, Lithium 12 Hydroxy grease

For heavy loads where you require a grease that can be pumped through an automatic system

  • Excellent extreme pressure anti-wear protection    
  • Extremely shear-stable for longer effective periods of lubrication    
  • Outstanding water resistance
VIEW DETAILS
No. 1241

No. 1241
NLGI #1, Lithium 12 Hydroxy grease

Bushing and sleeve type bearings

  • Excellent extreme pressure anti-wear protection    
  • Extremely shear-stable for longer effective periods of lubrication    
  • Outstanding water resistance
VIEW DETAILS
No. 1242

No. 1242
NLGI #2, Lithium 12 Hydroxy grease

Multi-purpose, heavy-duty chassis, ball joints, king pins, open gears, racks, cams and ways

  • Excellent extreme pressure anti-wear protection    
  • Extremely shear-stable for longer effective periods of lubrication    
  • Outstanding water resistance
VIEW DETAILS
No. 130-A

No. 130-A
NLGI #2.5, Calcium grease

Plain bearings, cams, slides

VIEW DETAILS
No. 130-AA

No. 130-AA
NLGI #1, Calcium grease

Plain bearings, cams, slides

VIEW DETAILS
No. 1444

No. 1444
NLGI #2, Aluminum Complex grease

Heavy-duty construction quarry and mining equipment

VIEW DETAILS
No. 1500

No. 1500
NLGI #00, Lithium Complex grease

Leaky gear cases, trailer wheel bearings where a semi-fluid grease is required

  • Can withstand higher operating temperatures than traditional lithium multi-purpose greases    
  • Used in centralized lubrication systems and new on-highway trailer wheel bearings    
VIEW DETAILS
No. 1550

No. 1550
NLGI #0, Lithium Complex grease

  • Can withstand higher operating temperatures than traditional lithium multi-purpose greases    
  • For heavy load, tight tolerances    
  • Automatic dispensing systems
VIEW DETAILS
No. 1551

No. 1551
NLGI #1, Lithium Complex grease

Multi-purpose industrial construction, automotive, marine, mining

  • Can withstand higher operating temperatures than traditional lithium multi-purpose greases    
  • Tacky, adhesive    
  • Water-resistant
VIEW DETAILS
No. 1552

No. 1552
NLGI #2, Lithium Complex grease

Multi-purpose industrial construction, automotive, marine, mining

  • Can withstand higher operating temperatures than traditional lithium multi-purpose greases    
  • Tacky, adhesive    
  • Water-resistant
VIEW DETAILS
No. 2

No. 2
ISO Grade 46, Mineral oil

Light general oil applications, air-line oilers, oil cups

  • 20W for light general oil applications
  • Superior protective coating of metals
  • Exceptional lubricity
VIEW DETAILS
No. 3000

No. 3000
NLGI #2, Lithium 12 Hydroxy grease

Open gears, fifth wheels, heavy-duty applications where a black, moly, graphite, adhesive lubricant is required

  • Molybdenum Disulfide extends extreme pressure/anti-wear capabilities in boundary lubrication situations    
  • Graphite extends extreme pressure/anti-wear capabilities in boundary lubrication situations    
  • Polymer adds to higher shear stability and longer lubricant life
VIEW DETAILS
No. 3000-W

No. 3000-W
NLGI #1, Lithium 12 Hydroxy grease

Open gears, colder weather applications where a black, moly, graphite, adhesive lubricant is required

  • Molybdenum Disulfide extends extreme pressure/anti-wear capabilities in boundary lubrication situations    
  • Graphite extends extreme pressure/anti-wear capabilities in boundary lubrication situations    
  • Polymer adds to higher shear stability and longer lubricant life
VIEW DETAILS
No. 35 Soluble Oil

No. 35 Soluble Oil
ISO Grade 46, Mineral oil

Cutting Fluid

  • Operator Friendly    
  • Sulfur and Chlorine Free    
  • Low Foaming
VIEW DETAILS
No. 3-V

No. 3-V
ISO Grade 68, Mineral oil

Machine tool ways and bearings, circulating systems

  • Specially designed for way lubrication
  • Superior protective coating of metals
  • Exceptional lubricity
VIEW DETAILS
No. 4

No. 4
ISO Grade 150, Mineral oil

Medium to slow speed heavy-duty bearings, gear boxes where SAE 90 gear oil is required

  • SAE 90 gear oil for medium to medium slow speed heavy-duty bearings    
  • Exceptional film strength    
  • Rust and corrosion protection
VIEW DETAILS
No. 5555

No. 5555
NLGI #000, Anhydrous Calcium grease

Gear cases, centralized lubricating systems, leaky gear boxes

  • Semi-fluid, water-repellent grease    
  • Excellent for automatic lubrications systems    
  • Excellent cold test characteristics
VIEW DETAILS
No. 630-2

No. 630-2
NLGI #2, Lithium grease

Multi-purpose general grease, grease guns

  • Water resistant    
  • High anti-wear for extra lubricity    
  • Oxidation inhibited
VIEW DETAILS
No. 630-A

No. 630-A
NLGI #2.5, Lithium grease

Water pumps, applications requiring a cup type lubricant

  • Water resistant    
  • High anti-wear for extra lubricity    
  • Oxidation inhibited
VIEW DETAILS
No. 630-AA

No. 630-AA
NLGI #1, Lithium grease

Multi-purpose general grease, automatic dispensing systems

  • Water resistant    
  • High anti-wear for extra lubricity    
  • Oxidation inhibited
VIEW DETAILS
No. 630-AAA

No. 630-AAA
NLGI #0, Lithium grease

Enclosed gear cases

  • Water resistant    
  • High anti-wear for extra lubricity    
  • Oxidation inhibited
VIEW DETAILS
No. 730-0

No. 730-0
NLGI #0, Aluminum Complex grease

High temp applications

  • Reversibility after high-heat, high shear conditions    
  • Excellent sealing capabilities    
  • Chemical resistant
VIEW DETAILS
No. 730-1

No. 730-1
NLGI #1, Aluminum Complex grease

High temp applications

  • Reversibility after high-heat, high shear conditions    
  • Excellent sealing capabilities    
  • Chemical resistant
VIEW DETAILS
No. 730-2

No. 730-2
NLGI #2, Aluminum Complex grease

High temp applications

  • Reversibility after high-heat, high shear conditions    
  • Excellent sealing capabilities    
  • Chemical resistant
VIEW DETAILS
No. 777

No. 777
NLGI #1.5, Anhydrous Calcium grease

Starter motor shaft

VIEW DETAILS
No. 78 Oil

No. 78 Oil
ISO Grade 150, Mineral oil

Cooker Oil, Manzel lubricators for A-B Cookers and sterilizers

  • Reduces oxidation and sludge    
  • Corrosion resistant
VIEW DETAILS
No. 78 Oil-ZF

No. 78 Oil-ZF
ISO Grade 150, Mineral oil

Cooker Oil, Manzel lubricators for A-B Cookers and sterilizers

  • Zinc-free formulation    
  • Reduces oxidation and sludge
VIEW DETAILS
No. 8

No. 8
ISO Grade 460, Mineral oil

Enclosed gear boxes where an SAE 140 gear oil is required, worm gears

  • SAE 140 gear oil for slow speed, worm gear applications    
  • Exceptional film strength    
  • Rust and corrosion protection
VIEW DETAILS
No. 930-2

No. 930-2
NLGI #2, Gelling agent grease

Grease gun applications

  • High film strength    
  • Exceptional resistance to water    
  • Non-melt type
VIEW DETAILS
No. 930-A

No. 930-A
NLGI #3, Gelling agent grease

  • High film strength    
  • Exceptional resistance to water    
  • Non-melt type
VIEW DETAILS
No. 930-AA

No. 930-AA
NLGI #1, Gelling agent grease

Automatic grease dispensing devices

  • High film strength    
  • Exceptional resistance to water    
  • Non-melt type
VIEW DETAILS
No. 930-AAA

No. 930-AAA
NLGI #0, Gelling agent grease

Automatic grease dispensing devices, pressure gun applications

  • High film strength    
  • Exceptional resistance to water    
  • Non-melt type
VIEW DETAILS
Non-Detergent 10W

Non-Detergent 10W
SAE 10W, Motor oil

Motor and general oil applications requiring a non-detergent oil

  • High Viscosity Index    
  • High Flash and Fire Points    
  • Extra Clean Motor Oils
VIEW DETAILS
Non-Detergent 20W-20

Non-Detergent 20W-20
SAE 20W-20, Motor oil

Motor and general oil applications requiring a non-detergent oil

  • High Viscosity Index    
  • High Flash and Fire Points    
  • Extra Clean Motor Oils
VIEW DETAILS
Non-Detergent 30

Non-Detergent 30
SAE 30, Motor oil

Motor and general oil applications requiring a non-detergent oil

  • High Viscosity Index    
  • High Flash and Fire Points    
  • Extra Clean Motor Oils
VIEW DETAILS
Non-Detergent 40

Non-Detergent 40
SAE 40, Motor oil

Motor and general oil applications requiring a non-detergent oil

  • High Viscosity Index    
  • High Flash and Fire Points    
  • Extra Clean Motor Oils
VIEW DETAILS
Non-Detergent 50

Non-Detergent 50
SAE 50, Motor oil

Motor and general oil applications requiring a non-detergent oil

  • High Viscosity Index    
  • High Flash and Fire Points    
  • Extra Clean Motor Oils
VIEW DETAILS
Oil Well in a Bottle

Oil Well in a Bottle
Multi-purpose penetrating oil

  • Moisture displacement
  • Great for wet start applications
  • Great for general household use on hinges, locks, latches
VIEW DETAILS
Oven Chain Lubricant

Oven Chain Lubricant

Due to its extremely low residue buildup, it has proven to be very effective in bakery oven and conveyor chain applications.

  • Contains 10% Graphite
  • High Lubricity    
  • Excellent Penetration    
  • Effectiveness at High Temperatures
VIEW DETAILS
Pan Divider Oil

Pan Divider Oil
ISO Grade 15, USP White Mineral oil

Pan Divider Oil

  • NSF H1 and 3H Registered
  • Acceptable as a release agent on grills, ovens and other food processing equipment where contact is possible
VIEW DETAILS
perma CLASSIC

perma CLASSIC
Automatic lubricators pre-filled with quality Lubriplate Lubricants

  • Quick installation / tamper proof
  • Simple exchange / no special tools required
  • Inexpensive automatic single-point lubrication
VIEW DETAILS
perma FLEX

perma FLEX
Automatic lubricators pre-filled with quality Lubriplate Lubricants

  • Ready-to-use system / no assembly necessary
  • Quick and easy activation with dial
  • Discharge 1-12 months / in monthly steps = more flexibility 
  • For use in hot and cold environments
  • Year-round use for outdoor applications
VIEW DETAILS
perma FUTURA

perma FUTURA
Automatic lubricators pre-filled with quality Lubriplate Lubricants

  • Quick installation / tamper proof
  • Simple exchange / no special tools required
  • Inexpensive automatic single-point lubrication
  • Can be filled with up to NLGI #2 grease or oil
VIEW DETAILS
perma NOVA

perma NOVA
Automatic lubricators pre-filled with quality Lubriplate Lubricants

  • Reusable NOVA Control unit
  • Temperature independent during the entire discharge period
  • Accelerated pressure built-up for first discharge within one day
  • Simple handling / easy adjustments
  • Ideal for applications with considerable temperature variations
VIEW DETAILS
perma PRO MP-6

perma PRO MP-6
Multi-point automatic lubricators pre-filled with quality Lubriplate Lubricants

  • Easy configuration of discharge period and outlets
  • Display of remaining volume and active outlets
  • Status control on display
  • Easy to set and change at any time
  • Supply of 1 to 6 lubrication points with same lubricant amount
VIEW DETAILS
perma STAR CONTROL

perma STAR CONTROL
Automatic lubricators pre-filled with quality Lubriplate Lubricants

  • Quick and easy control of settings and remaining impulses / operating hours until LC exchange
  • More flexibility with simple programming of TIME or IMPULSE mode; settings can be changed at any time
  • PIN prevents manipulation
  • Reliable, precise lubricant discharge independent of temperature and counter pressure
VIEW DETAILS
perma STAR VARIO

perma STAR VARIO
Automatic lubricators pre-filled with quality Lubriplate Lubricants

  • Simple and self-explanatory operation
  • Precise settings, based on manufacturer recommendations, prevent lubricant starvation and save lubricant
  • Settings can be changed at any time
  • System can be turned off for extended equipment shut downs
VIEW DETAILS
PGO 150

PGO 150
ISO Grade 150, Synthetic Polyalkylene Glycol (PAG)

LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.

  • Outstanding protection against micropitting, abrasion and wear    
  • Unsurpassed extreme pressure and anti-wear performance    
  • Outstanding thermal stability
VIEW DETAILS
PGO 220

PGO 220
ISO Grade 220, Synthetic Polyalkylene Glycol (PAG)

LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.

  • Outstanding protection against micropitting, abrasion and wear    
  • Unsurpassed extreme pressure and anti-wear performance    
  • Outstanding thermal stability
VIEW DETAILS
PGO 320

PGO 320
ISO Grade 320, Synthetic Polyalkylene Glycol (PAG)

LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.

  • Outstanding protection against micropitting, abrasion and wear    
  • Unsurpassed extreme pressure and anti-wear performance    
  • Outstanding thermal stability
VIEW DETAILS
PGO 460

PGO 460
ISO Grade 460, Synthetic Polyalkylene Glycol (PAG)

LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.

  • Outstanding protection against micropitting, abrasion and wear    
  • Unsurpassed extreme pressure and anti-wear performance    
  • Outstanding thermal stability
VIEW DETAILS
PGO 680

PGO 680
ISO Grade 680, Synthetic Polyalkylene Glycol (PAG)

LUBRIPLATE PGO Gear Oils may be recommended for helical, bevel helical, planetary and worm gear reducers.

  • Outstanding protection against micropitting, abrasion and wear    
  • Unsurpassed extreme pressure and anti-wear performance    
  • Outstanding thermal stability
VIEW DETAILS
PGO FGL-150

PGO FGL-150
ISO Grade 150, Synthetic Polyalkylene Glycol (PAG)

Industrial gear boxes including helical, planetary and worm gear applications in food processing environments

  • Excellent thermal stability    
  • High wear reduction    
  • Superior performance under demanding conditions
VIEW DETAILS
PGO FGL-220

PGO FGL-220
ISO Grade 220, Synthetic Polyalkylene Glycol (PAG)

Industrial gear boxes including helical, planetary and worm gear applications in food processing environments

  • Excellent thermal stability    
  • High wear reduction    
  • Superior performance under demanding conditions
VIEW DETAILS
PGO FGL-320

PGO FGL-320
ISO Grade 320, Synthetic Polyalkylene Glycol (PAG)

Industrial gear boxes including helical, planetary and worm gear applications in food processing environments

  • Excellent thermal stability    
  • High wear reduction    
  • Superior performance under demanding conditions
VIEW DETAILS
PGO FGL-460

PGO FGL-460
ISO Grade 460, Synthetic Polyalkylene Glycol (PAG)

Industrial gear boxes including helical, planetary and worm gear applications in food processing environments

  • Excellent thermal stability    
  • High wear reduction    
  • Superior performance under demanding conditions
VIEW DETAILS
PGO FGL-680

PGO FGL-680
ISO Grade 680, Synthetic Polyalkylene Glycol (PAG)

Industrial gear boxes including helical, planetary and worm gear applications in food processing environments

  • Excellent thermal stability    
  • High wear reduction    
  • Superior performance under demanding conditions
VIEW DETAILS
PM-500

PM-500
ISO Grade 100, Mineral oil

Pear machines

  • NSF H1 Registered    
  • Specially suited for water conditions
VIEW DETAILS
POLY HP-2

POLY HP-2
NLGI #2, Polyurea grease

High-speed electric motor bearings

  • Electric Motor Bearings    
  • High Temperature Bearing Applications    
  • Pump Bearings
VIEW DETAILS
Power Hammer & Chisel Grease

Power Hammer & Chisel Grease
NLGI #2, Aluminum Complex grease

Heavy-duty power hammers

  • Greatly extends shaft and bushing life
  • Extreme pressure
VIEW DETAILS
Pure Flush

Pure Flush
ISO Grade 7, Mineral oil

LUBRIPLATE Pure Flush can be used to clean and flush bearings, gear cases, hydraulic systems, centralized lubricating systems, chain and air lines/air tools.

  • Excellent cleaning capabilities    
  • Used with existing lubricant    
  • Superior flushing 
VIEW DETAILS
Pure Tac

Pure Tac
NLGI #2, Aluminum Complex grease

For all types of medium to slow speed bearings, open gears and hydrostatic cooker chains. Designed for applications subject to water, heat and steam

  • NSF H1 Registered    
  • Excellent resistance to water washout    
  • Contains anti-microbial
VIEW DETAILS
Pure Tac Light

Pure Tac Light
NLGI #1.5, Aluminum Complex grease

For all types of medium to slow speed bearings, open gears and hydrostatic cooker chains. Designed for applications subject to water, heat and steam

  • NSF H1 Registered    
  • Excellent resistance to water washout    
  • Contains anti-microbial
VIEW DETAILS
RCO-68-FG

RCO-68-FG
ISO Grade 68, Polyalphaolefin (PAO)-Based Synthetic oil

LUBRIPLATE RCO-68 FG is recommended for use in refrigeration compressor systems where a NSF International H-1 Registered, food machinery lubricant is required.

  • Extended Drain Intervals    
  • Excellent Chemical and Thermal Stability    
  • Minimizes formation of Harmful Varnish, Gum and Sludge Deposits
VIEW DETAILS
Refrigeration Compressor Oil 68-N

Refrigeration Compressor Oil 68-N
ISO Grade 68, Mineral oil

Refrigeration compressor systems utilizing ammonia, CFC (chlorofluorocarbon) and HCFC (hydrochlorofluorocarbon) refrigerants

  • Minimizes formation of harmful varnish, gum and sludge deposits
  • Will not 'wax out'
VIEW DETAILS
Refrigeration Compressor Oil 68-P

Refrigeration Compressor Oil 68-P
ISO Grade 68, Mineral oil

LUBRIPLATE Refrigeration Compressor Oil 68-P is a “semi-synthetic” highly refined, wax-free, paraffinic lubricant formulated for use in refrigeration compressor systems utilizing ammonia.

  • Extended Drain Intervals    
  • Excellent Chemical and Thermal Stability    
  • Minimizes Formation of Harmful Varnish, Gum and Sludge Deposits
VIEW DETAILS
Rock Drill Oil 10R

Rock Drill Oil 10R
ISO Grade 32, Mineral oil

LUBRIPLATE Rock Drill Oils have proven their value with outstanding performance for several years under some of the most extreme operating conditions, lubricating rock drills, air hammers and other pn

  • Extreme pressure    
  • Non-fogging    
  • Eliminates gumming
VIEW DETAILS
Rock Drill Oil 30R

Rock Drill Oil 30R
ISO Grade 100, Mineral oil

LUBRIPLATE Rock Drill Oils have proven their value with outstanding performance for several years under some of the most extreme operating conditions, lubricating rock drills, air hammers and other pn

  • Extreme pressure    
  • Non-fogging    
  • Eliminates gumming
VIEW DETAILS
Seamer Oil FG-100

Seamer Oil FG-100
ISO Grade 100, USP White Mineral oil

LUBRIPLATE Seamer FG Oils are specifically designed to lubricate can seaming machines

  • Compounded with anti-wear additives    
  • Rust and oxidation inhibitors
VIEW DETAILS
Seamer Oil FG-150

Seamer Oil FG-150
ISO Grade 150, USP White Mineral oil

LUBRIPLATE Seamer FG Oils are specifically designed to lubricate can seaming machines

  • Compounded with anti-wear additives    
  • Rust and oxidation inhibitors
VIEW DETAILS
Seamer Oil FG-220

Seamer Oil FG-220
ISO Grade 100, USP White Mineral oil

LUBRIPLATE Seamer FG Oils are specifically designed to lubricate can seaming machines

  • Compounded with anti-wear additives    
  • Rust and oxidation inhibitors
VIEW DETAILS
SFGO Ultra 100

SFGO Ultra 100
ISO Grade 100, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for bearings, gearboxes, pumps and chains requiring ISO Viscosity Grades 100 through 1000.

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 1000

SFGO Ultra 1000
ISO Grade 1000, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for bearings, gearboxes, pumps and chains requiring ISO Viscosity Grades 100 through 1000.

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 15

SFGO Ultra 15
ISO Grade 15, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings,

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 150

SFGO Ultra 150
ISO Grade 150, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for bearings, gearboxes, pumps and chains requiring ISO Viscosity Grades 100 through 1000.

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 22

SFGO Ultra 22
ISO Grade 22, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings,

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 220

SFGO Ultra 220
ISO Grade 220, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for bearings, gearboxes, pumps and chains requiring ISO Viscosity Grades 100 through 1000.

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 32

SFGO Ultra 32
ISO Grade 32, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings,

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 320

SFGO Ultra 320
ISO Grade 320, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for bearings, gearboxes, pumps and chains requiring ISO Viscosity Grades 100 through 1000.

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 46

SFGO Ultra 46
ISO Grade 46, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings,

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 460

SFGO Ultra 460
ISO Grade 460, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for bearings, gearboxes, pumps and chains requiring ISO Viscosity Grades 100 through 1000.

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 68

SFGO Ultra 68
ISO Grade 68, Polyalphaolefin (PAO)-Based Synthetic oil

May be recommended for rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for hydraulic systems, pumps, motors, bearings,

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 680

SFGO Ultra 680
ISO Grade 680, Polyalphaolefin (PAO)-Based Synthetic oil

The LUBRIPLATE SFGO Ultra Series may be recommended for bearings, gearboxes, pumps and chains requiring ISO Viscosity Grades 100 through 1000.

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 7

SFGO Ultra 7
ISO Grade 7, Polyalphaolefin (PAO)-Based Synthetic oil

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFGO Ultra 7 Spray

SFGO Ultra 7 Spray
ISO Grade 7, Polyalphaolefin (PAO)-Based Synthetic oil

For applications which require a food grade penetrating fluid

  • Excellent thermal stability resulting in longer service life    
  • Superior oxidation resistance    
  • Outstanding anti-wear properties providing extended equipment life
VIEW DETAILS
SFL-0

SFL-0
NLGI #0, Aluminum Complex grease

Freezer and cold temperature applications that require an NLGI #0, NSF H1 lubricant

  • NSF H1 Registered    
  • Excellent low temperature pumpability    
  • Wide operating temp range
VIEW DETAILS
SFL-00

SFL-00
NLGI #00, Aluminum Complex grease

Freezer and cold temperature applications that require an NLGI #00, NSF H1 lubricant

  • NSF H1 Registered    
  • Excellent low temperature pumpability    
  • Wide operating temp range
VIEW DETAILS
SFL-000

SFL-000
NLGI #000, Aluminum Complex grease

Freezer and cold temperature applications that require an NLGI #000, NSF H1 lubricant

  • NSF H1 Registered    
  • For use in centralized lubrication systems    
  • Ideal for leaky gearboxes
VIEW DETAILS
SFL-1

SFL-1
NLGI #1, Aluminum Complex grease

Freezer and cold temperature applications that require an NLGI #1, NSF H1 lubricant

  • NSF H1 Registered    
  • Excellent low temperature pumpability    
  • Wide operating temp range
VIEW DETAILS
SFL-2

SFL-2
NLGI #2, Aluminum Complex grease

For food processing applications that require an NLGI #2, NSF H1 lubricant

  • NSF H1 Registered    
  • Excellent low temperature pumpability    
  • Wide operating temp range
VIEW DETAILS
Silicone Fluid FG-350

Silicone Fluid FG-350

Silicone for food processing equipment

  • 350cst @ 25°C
  • NSF H1 Registered    
  • Film provides rust, corrosion and tarnish resistance    
  • Wide operating temperature range
VIEW DETAILS
Special Auto/Marine Grease

Special Auto/Marine Grease
NLGI #2, Lithium 12 Hydroxy grease

Multi-purpose marine use, boat trailer bearings, heavy-duty chassis, ball joints, king pins, open gears, racks, cams and ways

  • Very good sealing properties to keep out water and dirt
  • Outstanding resistance to fresh and salt water
  • Tenacious and adhesive to increase stayput properties
VIEW DETAILS
Special Low Pour

Special Low Pour
ISO Grade 22, Hydraulic oil

Low temperature hydraulic applications

  • Fluid Zinc for anti-wear properties    
  • High natural V.I. for stable viscosities throughout a wider operating temperature range    
  • High Aniline Points for controlled sealswelling characteristics
VIEW DETAILS
SPO-222

SPO-222
ISO Grade 68, Mineral oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
SPO-233

SPO-233
ISO Grade 100, Mineral oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
SPO-244

SPO-244
ISO Grade 150, Mineral oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
SPO-255

SPO-255
ISO Grade 220, Mineral oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
SPO-266

SPO-266
ISO Grade 320, Mineral oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
SPO-277

SPO-277
ISO Grade 460, Mineral oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
SPO-288

SPO-288
ISO Grade 680, Mineral oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
SPO-299

SPO-299
SAE 250 Gear Oil, Mineral Oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
SPO-MG

SPO-MG
ISO Grade 220, Mineral oil

Gear cases, machine ways, chains and general purpose lubrication

  • Provide excellent oxidation and thermal stability    
  • Provide excellent demulsibility and filterability    
  • Anti-wear properties
VIEW DETAILS
Spray Lube 'A'

Spray Lube 'A'
NLGI #1, Lithium grease

Open gears, cams, couplings, slides, bearings

  • Multi-purpose grease that sprays like a fluid    
  • Exceptional penetrating qualities    
  • Will not run, wash off or dry up
VIEW DETAILS
SSO-FG-100

SSO-FG-100
ISO Grade 100, Polyalphaolefin (PAO)-Based Synthetic oil

The LUBRIPLATE SSO-FG Series of products are premium, fully synthetic lubricants designed to be used in seaming/canning equipment and related applications.

  • Approved for Angelus and Zacmi Seamers    
  • Water/steam-resistant
VIEW DETAILS
SSO-FG-150

SSO-FG-150
ISO Grade 150, Polyalphaolefin (PAO)-Based Synthetic oil

The LUBRIPLATE SSO-FG Series of products are premium, fully synthetic lubricants designed to be used in seaming/canning equipment and related applications.

  • Approved for Angelus and Zacmi Seamers    
  • Water/steam-resistant
VIEW DETAILS
STO-4 OIL

STO-4 OIL
ISO Grade 46, Mineral oil

LUBRIPLATE STO-4 is a special compounded oil recommended for the lubrication of stirrups on bottle filling machines.

  • Resists build-up and residue    
  • Excellent lubrication even with excessive moisture
VIEW DETAILS
STO-FG

STO-FG
ISO Grade 68, USP White Mineral oil

Stirrups – Bottle Fillers

  • Excellent emulsifying properties    
  • Anti-wear

 
VIEW DETAILS
Super 345 Motor Oil

Super 345 Motor Oil
SAE 5W-30, Motor Oil

Motor oil for passenger cars, light trucks

  • Friction-modified for improved fuel economy    
  • Protects against sludge and varnish formation    
  • Good low temperature pour point
VIEW DETAILS
Super Chain Oil

Super Chain Oil
ISO Grade 460, Mineral oil

LUBRIPLATE Super Chain Oil is recommended for bakery ovens, drying ovens and other type ovens where the temperature does not exceed 450°F.

  • Non-smoking    
  • Contains mico-fine graphite
VIEW DETAILS
Super FML-2 Spray

Super FML-2 Spray
NLGI #2, Anhydrous Calcium grease

General purpose food processing applications where an H1, NLGI #2 is required

  • NSF H1 Registered    
  • USP White Mineral-Oil Based Food Grade Grease    
  • Exceptional anti-wear properties
VIEW DETAILS
Super HDS 10W

Super HDS 10W
SAE 10W, Motor Oil

Commercial mixed-fleet engines

  • Resisted breakdown under high temperatures    
  • Maintained oil pressure under heavy load conditions    
  • Minimized rust and corrosion
VIEW DETAILS
Super HDS 30

Super HDS 30
SAE 30, Motor oil

Commercial mixed-fleet engines

  • Resisted breakdown under high temperatures    
  • Maintained oil pressure under heavy load conditions    
  • Minimized rust and corrosion
VIEW DETAILS
Super HDS 40

Super HDS 40
SAE 40, Motor oil

Off-highway diesel equipment, farm machinery, 2-stroke diesel engines

  • Resisted breakdown under high temperatures    
  • Maintained oil pressure under heavy load conditions    
  • Minimized rust and corrosion
VIEW DETAILS
Super HDS 50

Super HDS 50
SAE 50, Motor oil

Off-highway diesel equipment, farm machinery, 2-stroke diesel engines

  • Resisted breakdown under high temperatures    
  • Maintained oil pressure under heavy load conditions    
  • Minimized rust and corrosion
VIEW DETAILS
Super HDS 5W-20

Super HDS 5W-20
SAE 5W-20, Motor oil

Passenger cars, light trucks and sport utility vehicles

  • Resisted breakdown under high temperatures    
  • Maintained oil pressure under heavy load conditions    
  • Minimized rust and corrosion
VIEW DETAILS
SYN 1600

SYN 1600
NLGI #0, Lithium Complex grease

Multi-purpose and heavy-duty industrial applications

  • Manufactured with 100% PAO synthetic base fluid    
  • Outstanding effective lubricating temperature range, -50°F to 450°F    
  • Unsurpassed oxidation stability
VIEW DETAILS
SYN 1600/00

SYN 1600/00
NLGI #00, Lithium Complex grease

Cone drives, leaky gear boxes

  • Manufactured with 100% PAO synthetic base fluid    
  • Outstanding effective lubricating temperature range, -50°F to 450°F    
  • Unsurpassed oxidation stability
VIEW DETAILS
SYN 1601

SYN 1601
NLGI #1, Lithium Complex grease

Multi-purpose and heavy-duty industrial applications

  • Manufactured with 100% PAO synthetic base fluid    
  • Outstanding effective lubricating temperature range, -50°F to 450°F    
  • Unsurpassed oxidation stability
VIEW DETAILS
SYN 1602

SYN 1602
NLGI #2, Lithium Complex grease

Multi-purpose and heavy-duty industrial applications

  • Manufactured with 100% PAO synthetic base fluid    
  • Outstanding effective lubricating temperature range, -50°F to 450°F    
  • Unsurpassed oxidation stability
VIEW DETAILS
SYN 3001

SYN 3001
NLGI #1, Lithium Complex grease

Heavy-duty industrial, construction and automotive applications

  • 100% PAO Synthetic Base Fluid    
  • Contains 5% Molybdenum Disulfide – Meets the requirements of heavy-duty construction equipment    
  • High melting point
VIEW DETAILS
SYN 3002

SYN 3002
NLGI #2, Lithium Complex grease

Heavy-duty industrial, construction and automotive applications

  • 100% PAO Synthetic Base Fluid    
  • Contains 5% Molybdenum Disulfide – Meets the requirements of heavy-duty construction equipment    
  • High melting point
VIEW DETAILS
SYN EMB

SYN EMB
NLGI #2, Lithium Complex grease

Medium to high speed electric motor bearings

  • 100% Synthetic    
  • For all types of medium to high speed electric motor, fan and pump bearings    
  • Anti-wear and extreme pressure additives
VIEW DETAILS
SYN GR-132

SYN GR-132
NLGI #2, Lithium Complex grease

High-speed anti-friction bearings, low temperatures

  • 100% Synthetic    
  • For all types of high speed anti-friction bearings    
  • Excellent low temperature grease
VIEW DETAILS
SYN HTF-LIGHT

SYN HTF-LIGHT
ISO Grade 32, Synthetic oil

LUBRIPLATE SYN HTF-Light is recommended for oil-type heat exchangers used in asphalt plants, roofers’ tar kettles, concrete tile and black curing machines and many other similar industrial application

VIEW DETAILS
SYN LTR-2/460

SYN LTR-2/460
NLGI# 2, Synthetic, Heavy-Duty, Tacky, Red, Lithium Complex Grease

  • Outstanding effective lubricating temperature range, -50°F to 450°F
  • Unsurpassed oxidation stability
  • Compatibility with most mineral oil-based greases
  • Outstanding shear stability. These greases do not thin out when worked in the application
VIEW DETAILS
Syn Lube 100

Syn Lube 100
ISO Grade 100, Polyalphaolefin (PAO)-Based Synthetic oil

recommended for many types of rotary screw and rotary vane air compressors. These synthetic fluids are excellent for high temperature bearing and chain applications as well as situations striving for

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 1000

Syn Lube 1000
ISO Grade 1000, Polyalphaolefin (PAO)-Based Synthetic oil

gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures. These fluids are also excellent lubricants for gear pumps and positive displacement blowers.

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 150

Syn Lube 150
ISO Grade 150, Polyalphaolefin (PAO)-Based Synthetic oil

gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures. These fluids are also excellent lubricants for gear pumps and positive displacement blowers.

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 22

Syn Lube 22
ISO Grade 22, Polyalphaolefin (PAO)-Based Synthetic oil

recommended for many types of rotary screw and rotary vane air compressors. These synthetic fluids are excellent for high temperature bearing and chain applications as well as situations striving for

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 220

Syn Lube 220
ISO Grade 220, Polyalphaolefin (PAO)-Based Synthetic oil

gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures. These fluids are also excellent lubricants for gear pumps and positive displacement blowers.

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 32

Syn Lube 32
ISO Grade 32, Polyalphaolefin (PAO)-Based Synthetic oil

recommended for many types of rotary screw and rotary vane air compressors. These synthetic fluids are excellent for high temperature bearing and chain applications as well as situations striving for

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 320

Syn Lube 320
ISO Grade 320, Polyalphaolefin (PAO)-Based Synthetic oil

gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures. These fluids are also excellent lubricants for gear pumps and positive displacement blowers.

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 46

Syn Lube 46
ISO Grade 46, Polyalphaolefin (PAO)-Based Synthetic oil

recommended for many types of rotary screw and rotary vane air compressors. These synthetic fluids are excellent for high temperature bearing and chain applications as well as situations striving for

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 460

Syn Lube 460
ISO Grade 460, Polyalphaolefin (PAO)-Based Synthetic oil

gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures. These fluids are also excellent lubricants for gear pumps and positive displacement blowers.

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 68

Syn Lube 68
ISO Grade 68, Polyalphaolefin (PAO)-Based Synthetic oil

recommended for many types of rotary screw and rotary vane air compressors. These synthetic fluids are excellent for high temperature bearing and chain applications as well as situations striving for

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube 680

Syn Lube 680
ISO Grade 680, Polyalphaolefin (PAO)-Based Synthetic oil

gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures. These fluids are also excellent lubricants for gear pumps and positive displacement blowers.

  • Excellent lubricity    
  • Superior heat transfer characteristics    
  • Outstanding water demulsibility
VIEW DETAILS
Syn Lube HD 150

Syn Lube HD 150
ISO Grade 150, Polyalphaolefin (PAO)-Based Synthetic oil

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are excellent gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures and whenever an extreme press

  • Excellent thermal stability and oxidation resistant characteristics    
  • Outstanding extreme pressure and anti-wear properties    
  • Exceptional demulsibility characteristics
VIEW DETAILS
Syn Lube HD 220

Syn Lube HD 220
ISO Grade 220, Polyalphaolefin (PAO)-Based Synthetic oil

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are excellent gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures and whenever an extreme press

  • Excellent thermal stability and oxidation resistant characteristics    
  • Outstanding extreme pressure and anti-wear properties    
  • Exceptional demulsibility characteristics
VIEW DETAILS
Syn Lube HD 320

Syn Lube HD 320
ISO Grade 320, Polyalphaolefin (PAO)-Based Synthetic oil

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are excellent gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures and whenever an extreme press

  • Excellent thermal stability and oxidation resistant characteristics    
  • Outstanding extreme pressure and anti-wear properties    
  • Exceptional demulsibility characteristics
VIEW DETAILS
Syn Lube HD 460

Syn Lube HD 460
ISO Grade 460, Polyalphaolefin (PAO)-Based Synthetic oil

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are excellent gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures and whenever an extreme press

  • Excellent thermal stability and oxidation resistant characteristics    
  • Outstanding extreme pressure and anti-wear properties    
  • Exceptional demulsibility characteristics
VIEW DETAILS
Syn Lube HD 680

Syn Lube HD 680
ISO Grade 680, Polyalphaolefin (PAO)-Based Synthetic oil

LUBRIPLATE SYN LUBE HD SERIES ISO VG 150 - 680 fluids are excellent gear and bearing lubricants for use under severe conditions such as extremely high or low temperatures and whenever an extreme press

  • Excellent thermal stability and oxidation resistant characteristics    
  • Outstanding extreme pressure and anti-wear properties    
  • Exceptional demulsibility characteristics
VIEW DETAILS
Syn Lube XHD 3200

Syn Lube XHD 3200
ISO Grade 3200, Polyalphaolefin (PAO)-Based Synthetic oil

Heavy-duty girth gears commonly found in rotary kilns

  • 20 drum minimum order
VIEW DETAILS
SYN MPFG-7

SYN MPFG-7
ISO Grade 7, Polyalphaolefin (PAO)-Based Synthetic oil

LUBRIPLATE SYN MPFG-7 is recommended to lubricate plastic modular wear strips and sprockets; as a barrier fluid; and for applications where extreme low temperature fluid is required.

VIEW DETAILS
SYN ST High Performance H-1 Special

SYN ST High Performance H-1 Special
NLGI #3, PTFE grease

Food grade applications where silicone is required, compatible with EPDM Rubber

  • NSF H1 Registered    
  • Compatible with EPDM rubber and other non-silicone elastomers    
  • Resistant to hot water, steam and alkaline solutions
VIEW DETAILS
Synac 100

Synac 100
ISO Grade 100, Diester-Based Synthetic oil

The LUBRIPLATE SYNAC Series are recommended for all types of rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for vacuum pumps and blowers.

  • Excellent high temperature stability and oxidation resistance    
  • Very low deposit forming tendencies    
  • Outstanding anti-wear protection
VIEW DETAILS
Synac 150

Synac 150
ISO Grade 150, Diester-Based Synthetic oil

The LUBRIPLATE SYNAC 150, 220 & 320 Series make excellent lubricants for vacuum pumps, blowers, gear boxes, centrifuges and chains.

  • Excellent high temperature stability and oxidation resistance    
  • Very low deposit forming tendencies    
  • Outstanding anti-wear protection
VIEW DETAILS
Synac 220

Synac 220
ISO Grade 220, Diester-Based Synthetic oil

The LUBRIPLATE SYNAC 150, 220 & 320 Series make excellent lubricants for vacuum pumps, blowers, gear boxes, centrifuges and chains.

  • Excellent high temperature stability and oxidation resistance    
  • Very low deposit forming tendencies    
  • Outstanding anti-wear protection
VIEW DETAILS
Synac 32

Synac 32
ISO Grade 32, Diester-Based Synthetic oil

The LUBRIPLATE SYNAC Series are recommended for all types of rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for vacuum pumps and blowers.

  • Excellent high temperature stability and oxidation resistance    
  • Very low deposit forming tendencies    
  • Outstanding anti-wear protection
VIEW DETAILS
Synac 46

Synac 46
ISO Grade 46, Diester-Based Synthetic oil

The LUBRIPLATE SYNAC Series are recommended for all types of rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for vacuum pumps and blowers.

  • Excellent high temperature stability and oxidation resistance    
  • Very low deposit forming tendencies    
  • Outstanding anti-wear protection
VIEW DETAILS
Synac 68

Synac 68
ISO Grade 68, Diester-Based Synthetic oil

The LUBRIPLATE SYNAC Series are recommended for all types of rotary screw, rotary vane and reciprocating air compressors. They also make excellent lubricants for vacuum pumps and blowers.

  • Excellent high temperature stability and oxidation resistance    
  • Very low deposit forming tendencies    
  • Outstanding anti-wear protection
VIEW DETAILS
Syncool

Syncool
ISO Grade 46, Polyglycolester (PGE)-Based Syntetic oil

LUBRIPLATE Syncool is a 100% synthetic polyglycolester fluid targeted for high performance in rotary screw and rotary vane air compressors where high operating temperatures are present.

  • It is biodegradable    
  • Excellent thermal and oxidation stability characteristics    
  • Non-carbonizing which eliminates harmful deposits
VIEW DETAILS
Syncool FG

Syncool FG
ISO Grade 46, Polyglycolester (PGE)-Based Syntetic oil

Typically, compressors with discharge air temperatures ranging from 210°F to 240°F are candidates for LUBRIPLATE Syncool FG.

  • It is biodegradable    
  • Excellent thermal and oxidation stability characteristics    
  • Non-carbonizing which eliminates harmful deposits
VIEW DETAILS
Synflush

Synflush
ISO Grade 32, Synthetic oil

LUBRIPLATE SYNFLUSH is a premium quality, pure synthetic fluid designed to clean and dissolve varnish/deposits found in rotary screw and reciprocating type air compressors while the compressor is in o

VIEW DETAILS
Synflush FG

Synflush FG
ISO Grade 46, Synthetic flushing oil

LUBRIPLATE Synflush FG is compatible with Synthetic Polyalphaolefin, Polyolesters, Diesters, Polyalkylene Glycols (PAG’s) as well as mineral based fluids; therefore, it may be used when switching from

VIEW DETAILS
SYN-H1-220

SYN-H1-220
ISO Grade 220, Polyalkylene Glycol (PAG)

Bearings and gear boxes in high temperature applications

  • NSF H1 Registered    
  • 12 Stages Passed on FZG Four Square Gear Test    
  • Outstanding thermal and oxidative stability
VIEW DETAILS
Synthetic High Temp Fluid 220

Synthetic High Temp Fluid 220
ISO Grade 220, Synthetic Ester

Oven chains, high temperature bearing and gear applications

  • Eliminates carbon build-up on chains    
  • Does not contain harmful VOC’s which pollute the atmosphere    
  • Advanced ester chemistry reduces friction, wear and energy costs
VIEW DETAILS
Synthetic High Temp Fluid 68

Synthetic High Temp Fluid 68
ISO Grade 68, Synthetic Ester

Oven chains, high temperature bearing and gear applications

  • Eliminates carbon build-up on chains    
  • Does not contain harmful VOC’s which pollute the atmosphere    
  • Advanced ester chemistry reduces friction, wear and energy costs
VIEW DETAILS
Synthetic Worm Gear Lubricant

Synthetic Worm Gear Lubricant
ISO Grade 460, Polyalphaolefin (PAO)-Based Synthetic oil

EExcellent gear and bearing lubricant for use under severe conditions, such as extremely high or low temperatures.

  • Excellent thermal stability    
  • Outstanding anti-wear properties    
  • Exceptional demulsibility characteristics
VIEW DETAILS
Synxtreme AC-32

Synxtreme AC-32
ISO Grade 32, Polyolester (POE)-Based Synthetic oil

Rotary Screw and Rotary Vane Air Compressors, Reciprocating Air Compressors, Turbine Engines, Hydraulic Systems

  • Potential for extended drain intervals of +10,000 hours    
  • Readily biodegradable (Pw1)    
  • Outstanding solvency to keep air compressors clean
VIEW DETAILS
Synxtreme AC-46

Synxtreme AC-46
ISO Grade 46, Polyolester (POE)-Based Synthetic oil

Rotary Screw and Rotary Vane Air Compressors, Reciprocating Air Compressors, Turbine Engines, Hydraulic Systems

  • Potential for extended drain intervals of +10,000 hours    
  • Readily biodegradable (Pw1)    
  • Outstanding solvency to keep air compressors clean
VIEW DETAILS
Synxtreme AC-68

Synxtreme AC-68
ISO Grade 68, Polyolester (POE)-Based Synthetic oil

Rotary Screw and Rotary Vane Air Compressors, Reciprocating Air Compressors, Turbine Engines, Hydraulic Systems

  • Potential for extended drain intervals of +10,000 hours    
  • Readily biodegradable (Pw1)    
  • Outstanding solvency to keep air compressors clean
VIEW DETAILS
Synxtreme FG-0

Synxtreme FG-0
NLGI #0, Calcium Sulfonate grease

Multi-purpose food-grade applications

  • NSF H1 Registered    
  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
VIEW DETAILS
Synxtreme FG-000/320

Synxtreme FG-000/320
NLGI #000, Calcium Sulfonate grease

Food-grade applications for high temperatures, increased oxidation stability

  • NSF H1 Registered    
  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
VIEW DETAILS
Synxtreme FG-1

Synxtreme FG-1
NLGI #1, Calcium Sulfonate grease

Multi-purpose food-grade applications

  • NSF H1 Registered    
  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
VIEW DETAILS
Synxtreme FG-1/220

Synxtreme FG-1/220
NLGI #1, Calcium Sulfonate grease

Multi-purpose food-grade applications

  • NSF H1 Registered    
  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
VIEW DETAILS
Synxtreme FG-2

Synxtreme FG-2
NLGI #2, Calcium Sulfonate grease

Multi-purpose food-grade applications

  • NSF H1 Registered    
  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
VIEW DETAILS
Synxtreme FG-2 Spray

Synxtreme FG-2 Spray
NLGI #2, Calcium Sulfonate grease

Multi-purpose food-grade applications

  • NSF H1 Registered    
  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
VIEW DETAILS
Synxtreme FG-2/220

Synxtreme FG-2/220
NLGI #2, Calcium Sulfonate grease

Multi-purpose food-grade applications

  • NSF H1 Registered    
  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention
VIEW DETAILS
Synxtreme FRH1-46

Synxtreme FRH1-46
ISO Grade 46, Polyolester (POE)-Based Synthetic oil

High performance hydraulic fluid designed for demanding industrial and food processing applications requiring fire resistance, and excellent anti-wear properties over

  • Fire resistance    
  • Excellent anti-wear performance    
  • Biodegradability
VIEW DETAILS
Synxtreme HD-0

Synxtreme HD-0
NLGI #0, Calcium Sulfonate grease

Anti-friction bearings, subjected to wide operating temperatures

  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
  • Delivers lubricant consolidation because of their multi-use capability
VIEW DETAILS
Synxtreme HD-1

Synxtreme HD-1
NLGI #1, Calcium Sulfonate grease

Anti-friction bearings, subjected to wide operating temperatures

  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
  • Delivers lubricant consolidation because of their multi-use capability
VIEW DETAILS
Synxtreme HD-1/220

Synxtreme HD-1/220
NLGI #1, Calcium Sulfonate grease

Slow to medium speed applications where wide temperature range is desired

  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
  • Delivers excellent anti-wear and extreme pressure protection
VIEW DETAILS
Synxtreme HD-2

Synxtreme HD-2
NLGI #2, Calcium Sulfonate grease

Anti-friction bearings, subjected to wide operating temperatures

  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
  • Delivers lubricant consolidation because of their multi-use capability
VIEW DETAILS
Synxtreme HD-2/220

Synxtreme HD-2/220
NLGI #2, Calcium Sulfonate grease

Slow to medium speed applications where wide temperature range is desired

  • 100% Synthetic    
  • Calcium sulfonate thickener delivers unsurpassed rust and corrosion prevention    
  • Delivers excellent anti-wear and extreme pressure protection
VIEW DETAILS
Synxtreme HT Max

Synxtreme HT Max
NLGI #2, PTFE grease

High temperature rolling element applications requiring chemical and solvent resistance

  • NSF H1 Registered    
  • Excellent thermoxidative and hydrolytic stability    
  • Operating Temperature Range -20°C(-4°F) to 288°C(550°F)
VIEW DETAILS
Turbine Oil 32

Turbine Oil 32
ISO Grade 32, Mineral oil

LUBRIPLATE Turbine Oils have been specifically formulated for steam turbine applications.

VIEW DETAILS
UTF Biobased Green

UTF Biobased Green
ISO Grade 46, Mineral oil

LUBRIPLATE UTF Biobased Green is an ultimately biodegradable1 , multi-grade lubricant that can be used in agricultural, industrial and construction equipment and has proven field performance.

  • Environmentally responsible    
  • Anti-wear, anti-rust    
  • Ultimately biodegradable
VIEW DETAILS
UTF Oil

UTF Oil
ISO Grade 68, Universal Transmission Fluid

transmissions, final drives, and hydraulic systems of tractors

  • All-season    
  • Keep transmissions clean
VIEW DETAILS
Vacuum Pump Oil

Vacuum Pump Oil
ISO Grade 100, Mineral oil

LUBRIPLATE VACUUM PUMP OIL is recommended for most rotary vane and rotary lobe vacuum pumps.

  • No additives such as rust inhibitors    
  • Optimum lubrication without the formation of carbon deposits
VIEW DETAILS
Vacuum Pump Oil Light

Vacuum Pump Oil Light
ISO Grade 32, Mineral oil

LUBRIPLATE VACUUM PUMP OIL LIGHT is recommended for rotary vane vacuum pumps typically associated with delicate instrumentation.

  • No additives such as rust inhibitors    
  • Optimum lubrication without the formation of carbon deposits
VIEW DETAILS
Wheel Bearing Grease

Wheel Bearing Grease
NLGI #2, Lithium Complex grease

High-performance wheel bearing lubricant

  • Extreme pressure    
  • Water-resistant    
  • For use on cars, trucks, trailers, off-highway equipment
VIEW DETAILS
X-357

X-357
NLGI #1, Lithium grease

Sliding axles, open gearing, fifth wheels, latches, hooks, sliding doors

  • Extreme Pressure applications
  • Water Resistant
  • Heavy-Duty Lubricant with Moly-Disulfide
VIEW DETAILS
ZF Industrial 100

ZF Industrial 100
ISO Grade 100, Mineral oil

designed to perform in the most demanding hydraulic systems and air compressors.

  • Lower maintenance costs    
  • Extended oil life
VIEW DETAILS
ZF Industrial 32

ZF Industrial 32
ISO Grade 32, Mineral oil

designed to perform in the most demanding hydraulic systems and air compressors.

  • Lower maintenance costs    
  • Extended oil life
VIEW DETAILS
ZF Industrial 46

ZF Industrial 46
ISO Grade 46, Mineral oil

designed to perform in the most demanding hydraulic systems and air compressors.

  • Lower maintenance costs    
  • Extended oil life
VIEW DETAILS
ZF Industrial 68

ZF Industrial 68
ISO Grade 68, Mineral oil

Designed to perform in the most demanding hydraulic systems and air compressors.

  • Lower maintenance costs    
  • Extended oil life
VIEW DETAILS